G'day Mark,
here is the contents of the lirc.conf file. I've only done the codes for the number keys as that is all I need to get myth to change channels (and I'm too lazy to do the rest of the codes).
As for my setup: I'm using a PVR-350. I've got a set of splitters attached to the foxtel video out, and one set goes to the TV, while the other goes to the PVR-350 on the myth box.
Daniel
foxtel.conf
Description: Binary data
On 25/01/2005, at 12:20 PM, Mark Blair wrote:
Daniel,
I'd love to have that. Not ready yet, still having Nova-T issues right now.
Out of interest what cables do use to connect your foxtel box up to your input card and what card do you use ?
best Mark
On 25/01/2005, at 11:42 AM, Daniel Parnell wrote:
G'day All,
after quite a bit of messing about with the IR, I had actually given up trying to get my myth box to control the Foxtel digital set top box (after upgrading from ye olde foxtel which worked perfectly).
I'd looked around on the net and found a file for some programmable remote made by Philips that was supposed to be about to control the Foxtel digital box, but of course it was in it's own file format (a CCF file). There are several tools about that will extract the IR codes as hex strings, and finally this morning I looked through some code that is supposed to send these IR codes via a special interface attached to a PocketPC device. Using this code as a guide I was able to produce a simple lircd.conf file that allows me to change the channels on again :)
If anybody is interested I can send them a copy.
Daniel
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
