I have switched the cabling also, to check if thre was something with one of the LNB's, but it will
always work on port 1.
I have also tried an other Diseq with the same result.
However, there was an other user on the dev list claiming that it is working:
>Jesper S�rensen wrote:
I switched the two inputs from my LNB's on the Diseqc and now I get channels from Thor-1.0W (port 0) but not Sirius-5.0E (port 1).
As I can get both when i try with 'scan', I think there must be something wrong with the Diseqc handling ...
>I'm also using Thor & Sirius and it seems to work for me. I'm using the upcoming 3.5 patch and not 3.4 but none of the DiSEcQ stuff has changed
>so it shouldn't matter. I'm having >problems getting a solid lock on some transponders but I don't think that is DiSEqC related (don't know if it's a
>driver problem or if I need to climb the roof and take a look...)
Arne
belcampo wrote:
Hi all,
LNB switching doesn't work as far as I can see. Having 2 LNB's ASTRA 19.2 and 28.2. frequencies on 19.2 are found but not the ones I need from 28.2.
Freq 10773000 with Symbolrate 22000000 and H is on both, manualy defining to use lnb2 doesn't solve the problem.
Henk Schoneveld
------------------------------------------------------------------------
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
