If you would, please post the solution, as it might be useful to someone else in the future.
On Mon, 31 Jan 2005 19:59:25 +0800, Ow Mun Heng <[EMAIL PROTECTED]> wrote: > On Thu, 2005-01-27 at 18:25, Nicolas Mainil wrote: > > Maybe because it's not related to mythtv, you'd better ask your question > > on the lirc list ! > > :-) I've got it SOLVED. Thanks > > > > > http://lists.sourceforge.net/lists/listinfo/lirc-list > > > > Nicolas > > > > Ow Mun Heng wrote: > > > > >Top post.. : No Takers for this question?? > > >Please Help me.. :-0 > > > > > >On Wed, 2005-01-26 at 15:28, Ow Mun Heng wrote: > > > > > > > > >>Does anyone on either of this list know how to properly configure LIRC > > >>esp on a laptop? > > >> > > >>I have a D600, and I've verified that the IRDA works under linux. (using > > >>the SIR protocol) > > >> > > >>I've tried to make lirc work (under Gentoo) but am unsure why there's no > > >>response. > > >> > > >>Just to be sure, IRDA is _not_ started when I start LIRCd. > > >> > > >>ls -l /dev/lirc* gets me > > >>srw-rw-rw- 1 root root 0 Jan 26 2005 /dev/lircd > > >>prw-r--r-- 1 root root 0 Jan 26 2005 /dev/lircm > > >> > > >>and also /dev/lirc/0 > > >> > > >>if I start lircd via > > >> > > >>sudo lircd -n -d /dev/lirc/0 on a console and then > > >>I start "irw" on another, pressing _any_ buttons on the remote (any > > >>remote) doesn't give me any output. > > >> > > >>Addition to that, using irrecord also does not work. > > >> > > >>Does anyone has any experience in this?? All the stuffs I've seen on the > > >>internet involves a home-brewed IR receiver. > > >> > > >>If I can't get this to work, Mythtv will be of not much use :-( > > >> > > >> > > > > > > > > > > > >------------------------------------------------------------------------ > > > > > >_______________________________________________ > > >mythtv-users mailing list > > >[email protected] > > >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > ______________________________________________________________________ > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > -- > Ow Mun Heng > Gentoo/Linux on DELL D600 1.4Ghz > 98% Microsoft(tm) Free!! > Neuromancer 19:59:04 up 10:55, 6 users, > load average: 0.31, 0.43, 0.43 > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
