Same here with rc3d, other than a sound issue I was having. All my recorded sound was about 50% the volume it should have been, despite my rec profiles and what ivtvctl told me. It was working fine under good old 0.1.10-pre2-ck100z. In any case I udated to rc3f today and it seems perfect now.

Still, I'd recommend rc3d first and if you get the same volume problems, move up to rc3f.

-Shane


----- Original Message ----- From: "Aran Cox" <[EMAIL PROTECTED]>
To: "Discussion about mythtv" <[email protected]>
Sent: Wednesday, February 02, 2005 3:17 PM
Subject: Re: [mythtv-users] Good ivtv 2.0 driver?



On Tue, Feb 01, 2005 at 07:45:45PM -0500, MacNean C. Tyrrell wrote:
I need a good 0.2.0 driver for ivtv.  I have two pvr-250's.  Because i
had to send one back to Hauppauge because the tv tuner went bad and of
course the new one they sent was a new type of tuner, basically the type
39 or whatever.  So if i use pre2 the new tv tuner gets stuck on one
channel after awhile.  Well at least i think its with the pre2 drivers.
So far it hasn't happened with the 0.2.0 drivers.  I really like the
pre2 106u driver, no artifacts, really really clear picture, i really
really liked it.  Well with the 106u drivers, like i said the tuner
sticks on one channel.  However i'm using the ivtv-0.2.0-rc3e but there
are artifacts and like small skippings, that i got with the old 105k
driver i used to use (i think it was 105k, can't remember), but as long
as i upgraded to 106u, it's been perfect.  Well the 2.0 rc3 has the same
problems as the old one i used with artifacts and such, but i can use
both tuners now.  So does anyone know of a good ivtv 0.2.0 driver that
doesn't have artifacts or problems, it's uptime is a long time, etc?


rc3d is the first version I've used that's been absolutely rock solid. You may want to try it or something newer, and double check you have your modules.conf/modprobe.conf set up correctly. (In most cases you don't have to do anything special anymore, but make sure the correct supporting cast of drivers is loaded in the right order, or that the correct one is loaded at all.)

My uptime with rc3d was only interupted by a catastrophic failure of my
motherboard and was otherwise fantastic.

YMMV of course.

Aran




--------------------------------------------------------------------------------


_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to