I'm curious, but have you tried putting the diode directly in front of the receivers receptor? My file says 56kHz, so one would think if it was a timing issue then you could look at the time of the waveform on the oscilloscope and check that it is 1/56kHz = 17.9 microseconds.. I haven't studied exactly now these work so I may be a little off here, but it sounds more likely that your IR diode or resistor value isn't working well... (I should invest in a data aquisition card one of these days, but I hate to spend the money on one..) I assume you have the diodes correctly oriented since if you didn't you probably wouldn't get anything, but perhaps you should check it anyway..
The md5sum of my ledxmitd.conf is 49cf913e9c5e431359cd305f4c92a8f0 /etc/ledxmitd.conf
The file is a bit long to paste here and I'm sure its right off the web page, but if you want a copy of it, let me know.
Mark Clement wrote:
Hi All,
Has anyone got the basic (LED/DIODE/RESISTOR) blaster working on a Dishnet 3000 or 4000 Receiver ? If so i would like to know what ledxmtd.conf file you are using
I've have tried all the lirc configs i could find to do with dish with little luck I'm able to occasionaly get the receiver to pickup the number '2' but that's it This does tell me the setup is working partially - i even put the oscilloscope to it and checked for pulses - looks good to me but the receiver doesn't like it
Is it a timing issue ?
Any help greatly appreicated
Markus
------------------------------------------------------------------------
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
