On February 3, 2005 12:47 pm, Kelly Reed Schuerman wrote: > I'm having an issue with my mythbackend. It's a dual-tuner system and > anytime the second tuner is recording I get a series of error messages > repeated several times a second on the console. > > The errors look something like this: > > Aieee - PCI error! status 0x88008008, PCI status 0x290 > > Is this caused by an IRQ conflict? Would switching the PCI slot of that > tuner card make a difference? > > I've already disabled all the motherboard devices I was not using. > > The part that confuses me the most is that all the recordings are > perfectly fine and playback as if nothing is/was wrong. > > I'm running FC3 with kernel 2.6 and mythtv 0.16. > > Any ideas? > > Thanks, > > Sherm <>< > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I was getting a somewhat similar problem on my system, except that it happened at boot time. I'm using twin ir-blasters on the serial ports, and when I didn't load the kernel serial port drivers, I got a big mess of error messages that I couldn't even read. So I went in to the BIOS setup and reserved irq 3 and 4 for isa/non-pnp, so that the pvi slots wouldn't try to use then. Since then everything seems to be working fine. Hope this helps, but I could be completely off target on this one, Mark _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
