>>>>> Taylor Jacob writes:
t> Get CVS as of now, or wait for .17.. I just commited a full scan
t> for terresterial and cable channels. This will make scaning easy..
t> Otherwise you will have to manually add entries to your
t> dtv_multiplex table..
I am trying to get this card working with cable. I am using
CVS of mythtv and dvb-kernel/dvb-apps from last night. During full
scan, it is able to lock onto 13 frequencies but can't seem to find
any virtual channels(?).
Running "azap" on one of the frequencies shows:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 555000000 Hz
video pid 0x0000, audio pid 0x0000
status 1f | signal f680 | snr d0a2 | ber 00000ea0 | unc 00000000 | FE_HAS_LOCK
status 1f | signal f9c0 | snr d7a0 | ber 00007ff8 | unc 0000000c | FE_HAS_LOCK
status 1f | signal fa00 | snr d5f8 | ber 00007ff8 | unc 0000000c | FE_HAS_LOCK
[...]
Running "dvbscan -c" after that results in:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
dumping lists (0 services)
Done.
Sorry, I'm new to all this so I'm not sure what to expect. I don't
get anything out of /dev/dvb/adapter0/dvr0 when running "azap -r".
Any suggestions for debugging this? Thanks.
--
Gregorio Gervasio, Jr.
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
