Last bit of followup: Once I had recorded successfully, I could go into LiveTV, and it was going with the last channel it recorded in, in this case 12.1
And, until I change the channel, no matter what was in the channelinput field, it would try to open 12.1. On Thu, 10 Feb 2005 22:39:40 -0700, Blammo [doh] <[EMAIL PROTECTED]> wrote: > Little more info: > > I went back and blew out all the channels, scapped QAM and went back to air. > > Now, at least, I'm recording succesfully. However, I'm seeing LiveTV > problem. I'm not enough of a programmer to tell you what's causing it, > but I can see what's wrong. > > Somehow, the "STARTCHAN" is getting re-written as a null. I can fix > it, and watch it get set to null again, which causes LiveTV to fail. > > Example: > > 2005-02-10 22:33:47.752 MainServer::HandleAnnounce Playback > 2005-02-10 22:33:47.755 adding: backend1 as a client (events: 0) > 2005-02-10 22:33:47.818 MainServer::HandleAnnounce Playback > 2005-02-10 22:33:47.820 adding: backend1 as a client (events: 0) > 2005-02-10 22:33:47.826 adding: backend1 as a remote ringbuffer > 2005-02-10 22:33:47.841 Changing from None to WatchingLiveTV > 2005-02-10 22:33:47.857 DVB#0 DVB SI Table Parser Started > 2005-02-10 22:33:47.858 DVB#0 Using DVB card 0, with frontend Nextwave > nxt2002 VSB/QAM frontend. > 2005-02-10 22:33:47.861 DVB#0 ERROR - Unable to find channel in database. > 2005-02-10 22:33:47.863 DVB#0 ERROR - Failed to get channel options > for channel . > 2005-02-10 22:33:47.864 DVB#0 Recorder: Card opened successfully > (using PS mode). > 2005-02-10 22:33:47.865 DVB#0 ERROR - No PIDS set, please correct your > channel setup. > 2005-02-10 22:33:47.861 DVB#0 DVB Signal Monitor Starting > 2005-02-10 22:33:48.868 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:49.870 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:50.873 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:51.876 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:52.879 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:53.882 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:54.885 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:55.887 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:56.890 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:57.893 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:58.896 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:33:59.899 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:34:00.902 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:34:01.904 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:34:02.892 Couldn't read data from the capture card in 15 > seconds. Stopping. > 2005-02-10 22:34:02.907 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:34:02.926 Changing from WatchingLiveTV to None > 2005-02-10 22:34:03.912 DVB#0 WARNING - No data from card in 1 second. > 2005-02-10 22:34:03.917 Closing DVB recorder > 2005-02-10 22:34:03.919 Closing DVB channel > 2005-02-10 22:34:04.069 DVB#0 DVB Signal Monitor Stopped > 2005-02-10 22:34:19.788 Reloading backend settings > > 2005-02-10 22:35:02.478 Started recording "The Tonight Show With Jay > Leno" on channel: 2092 on cardid: 2, sourceid 2 > 2005-02-10 22:35:02.483 DVB#0 DVB SI Table Parser Started > 2005-02-10 22:35:02.485 DVB#0 Using DVB card 0, with frontend Nextwave > nxt2002 VSB/QAM frontend. > 2005-02-10 22:35:02.487 scheduler: Last message repeated 1 times > 2005-02-10 22:35:02.487 DVB#0 DVB Signal Monitor Starting > 2005-02-10 22:35:02.642 scheduler: Schedule Change > 2005-02-10 22:35:02.995 DVB#0 Signal Locked > 2005-02-10 22:35:03.489 DVB#0 DVB signal fc20 | snr e1bc | ber 0 | unc 0 > 2005-02-10 22:35:03.492 DVB#0 Status: LOCK. > 2005-02-10 22:35:03.493 DVB#0 Multiplex Locked > 2005-02-10 22:35:04.797 DVB#0 Successfully tuned to channel 12_1. > 2005-02-10 22:35:04.889 Changing from None to RecordingOnly > 2005-02-10 22:35:04.907 DVB#0 Recorder: Card opened successfully > (using PS mode). > 2005-02-10 22:35:04.975 DVB#0 Data read from DMX - This is for > debugging with transform.c > 2005-02-10 22:35:14.954 MainServer::HandleAnnounce Playback > 2005-02-10 22:35:14.983 adding: backend1 as a client (events: 0) > > You'll notice it IS recording successfully from HD. However, LiveTV > always fails. > > Which actually brings up another pet peeve. > > The Air2PC card is Card2. yet, it's ALWAYS preferred for LiveTV. I've > wriggled around all the settings I can priority wise, and it's still > always picked first? > > On Thu, 10 Feb 2005 22:40:50 -0600, Brian Foddy <[EMAIL PROTECTED]> wrote: > > On Thursday 10 February 2005 09:17 pm, Blammo [doh] wrote: > > > Current CVS, PVR-250, AIR2PC, Fedora 3, 2.6.10-DVB > > > > > > > > > PVR-250 working fine, getting this: > > > > > > 2005-02-10 20:15:47.306 Changing from None to WatchingLiveTV > > > 2005-02-10 20:15:47.321 DVB#0 DVB SI Table Parser Started > > > 2005-02-10 20:15:47.323 DVB#0 Using DVB card 0, with frontend Nextwave > > > nxt2002 VSB/QAM frontend. > > > 2005-02-10 20:15:47.325 DVB#0 DVB Signal Monitor Starting > > > 2005-02-10 20:15:47.326 DVB#0 ERROR - Unable to find channel in database. > > > 2005-02-10 20:15:47.330 DVB#0 ERROR - Failed to get channel options > > > for channel . > > > 2005-02-10 20:15:47.332 DVB#0 Recorder: Card opened successfully > > > (using TS mode). > > > 2005-02-10 20:15:47.334 DVB#0 WARNING - PID value (0) is outside DVB > > > specification. > > > 2005-02-10 20:15:47.346 DVB#0 Using Software Filtering. > > > 2005-02-10 20:15:48.349 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:49.351 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:50.358 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:51.363 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:52.366 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:53.369 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:54.372 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:55.374 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:56.377 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:57.380 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:58.383 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:15:59.386 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:16:00.389 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:16:01.391 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:16:02.370 Couldn't read data from the capture card in 15 > > > seconds. Stopping. > > > 2005-02-10 20:16:02.396 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:16:02.401 Changing from WatchingLiveTV to None > > > 2005-02-10 20:16:03.399 DVB#0 WARNING - No data from card in 1 second. > > > 2005-02-10 20:16:03.401 Closing DVB recorder > > > 2005-02-10 20:16:03.406 Closing DVB channel > > > 2005-02-10 20:16:03.520 DVB#0 DVB Signal Monitor Stopped > > > > > > Any time I try to watch LiveTV with the HD card. > > > > > > Doesn't seem to matter which value I put in the starting channel, still > > > happens. > > > > > > thoughts?? > > > > I'm at this same point after last weekend / early this week. > > Haven't had the time to dig into it further. Good job for the up coming > > weekend. > > >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
