|
Phill, I tried to follow the directions for setting the volumes using
Kmix. The directions are as follows: "On the mixer page, look for Line-In on your
sound card. You should see two LED's - a green one at the top, and a red one at
the bottom. The green one at the top is for muting; you want to make sure that
the green LED is a dark green, meaning that it's "off". You also want
to click on the red LED so that it turns bright red, indicating that it's
"ON"; this insures that the Line-in is used as the source. Click OK,
and make sure that you save the settings so that this is your default." The problem is that Kmix only shows one LED, the green one at the top. What do I do? Ralph -----Original Message----- > IIRC, that's to do with having one of the channels on your sound
card > wrongly turned up. The sound should get mixed with the video by
using > the line in as a capture channel. If you have the sound coming in
and > straight out again through line out then you get 2 streams of
sound - > one in realtime as the signal comes in and the other being
captured > (and played back if you're watching live tv). So you need to turn
down > the line out sound in your mixer (alsactl or whatever) because the > signals still coming in through the tuner card even though you're
not > watching anything and it's being played straight out again. > > I'm sure I've got my terms wrong in this description so sorry if
it's > not clear, but I hope you have the jist of it. Here's a link to the docco which explains it in a proper, intelligible fashion, unlike my confusing waffle above - http://www.mythtv.org/docs/mythtv-HOWTO-7.html HTH, Phill |
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
