[mythtv-users] PVR 350 XORG.CONF thoroughly confused

Scott Bickford Mon, 14 Feb 2005 18:27:58 -0800

I have downloaded the latest IVTV from atrpms.net as well as upgraded from .16 to .17. I had .16 working for two months.

I am having some problems trying to figure out the proper x settings following Jarod's FC2 install.

When I startx, I get:

LoadModule: "ivtvdev"
(WW) Warning, couldn't open module ivtvdev
(II) UnloadModule: "ivtvdev"
(EE) Failed to load module "ivtvdev" (module does not exist, 0)

xorg.conf
======
# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
       Identifier     "Default Layout"
       Screen      0  "Screen0" 0 0
       InputDevice    "Mouse0" "CorePointer"
       InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules/extensions/nvidia" ModulePath "/usr/X11R6/lib/modules/extensions" ModulePath "/usr/X11R6/lib/modules" FontPath "unix/:7100" EndSection

Section "Module"
       Load  "dbe"
       Load  "extmod"
#        Load  "fbdevhw"
       Load  "glx"
       Load  "record"
       Load  "freetype"
       Load  "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
       Identifier  "Keyboard0"
       Driver      "keyboard"
       Option      "XkbRules" "xfree86"
       Option      "XkbModel" "pc105"
       Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
       Identifier  "Mouse0"
       Driver      "mouse"
       Option      "Protocol" "IMPS/2"
       Option      "Device" "/dev/input/mice"
       Option      "ZAxisMapping" "4 5"
       Option      "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
       Identifier  "DevInputMice"
       Driver      "mouse"
       Option      "Protocol" "IMPS/2"
       Option      "Device" "/dev/input/mice"
       Option      "ZAxisMapping" "4 5"
       Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
       Identifier  "NTSC Monitor"
       HorizSync  30-68
       VertRefresh 50-120
       Mode "640x480"
         # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
         DotClock 34.564
         HTimings 720 752 840 928
         VTimings 480 484 488 504
         Flags    "-HSync" "-VSync"
       EndMode
EndSection

Section "Device"
       Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
       Driver      "ivtvdev"
       #Driver      "fbdev"

       ### change fb0 to whatever your card grabbed
       Option      "fbdev" "/dev/fb1"
       #Option       "ivtv" "/dev/fb1"

### change the BusID to whatever is reported by lspci, specify it as hex. #BusID "0:0x09:0" BusID "00:00:0x09" EndSection

Section "Screen"
       Identifier  "Screen0"
       Device      "Hauppauge PVR 350 iTVC15 Framebuffer"
       Monitor     "NTSC Monitor"
       DefaultDepth 24
       DefaultFbbpp 32
       Subsection "Display"
         Depth 24
         FbBpp 32
         Modes "480x480"
       EndSubsection
EndSection

Section "DRI"
       Group        0
       Mode         0666
EndSection

My rc.local is
=========
## START IVTV
/sbin/depmod -a
/sbin/modprobe ivtv
##sleep 60
#/sbin/modprobe ivtv-fb

#LIRCD
/sbin/depmod -a
/sbin/modprobe lirc_i2c
/sbin/chkconfig lircd on
/sbin/service lircd restart

# fix green
#ivtvctl -j reg=0x6c,val=0xfe -d /dev/video16
/usr/bin/ivtvctl --set-ctrl=mute=0
/usr/bin/ivtvctl -f width=640,height=480
/usr/bin/ivtvfbctl /dev/fb1 -alpha -on -globalalpha -nolocalalpha
/sbin/modprobe ivtv-fb

#/sbin/service mythbackend start

modprobe.conf
==========
#ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias tveeprom tveeprom-ivtv
#install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb

alias char-major-61 lirc_i2c

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 2/14/2005

_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

[mythtv-users] PVR 350 XORG.CONF thoroughly confused

Reply via email to