On Tue, Feb 15, 2005 at 10:31:14PM +1100, Eyal Lebedinsky wrote: > Surely it should time out after a few minutes? By now the following freqs > are > added to dvb_multiplex: > 571500000 > 536625000 > 585625000 > 564500000 > 543500000 > 536500000 > I only entered 543500000 and I do not expect signal on other frequencies.
Here's what's happening. It'll tune to a transport that you enter and look for the network information table. That table contains the frequencies and other data. Once it has that, it will tune each frequency it found out about and get channel information. In Australia, none of the stations include information about the other stations. You'll have to enter all 5 manually. As well as that, SBS seems to include all of their frequencies, which is your list above. Myth will tune each one in turn, though only one will work in your area. Yes it does time out eventually. Be patient. You can always enter the multiplex information manually (through advanced in the channel editor), then do a scan of existing transports. Then it won't look for network information but just use the frequency data you entered. Hamish -- Hamish Moffatt VK3SB <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
