I got it working after I installed the alsa-oss package for my distro
then doing almost exactly what you did. Not user why I needed the
alsa-oss package but it would not work without it.

On Sat, 2005-02-19 at 16:57 -0800, Wendy Seltzer wrote:
> I finally worked this out with my WinTV card and onboard Intel sound by 
> pulling up first aumix and then alsamixer as live tv was playing (be sure to 
> turn the volume down, because the wrong combinations can give some fast 
> feedback loops).   
> 
> I found it easiest first to use aumix to mute line and line1 (if the right 
> one isn't muted, that's where sound will play through even after you quit 
> watching). 
> 
> Then using alsamixer, use space to set the capture device.  For me, that 
> meant getting the red "CAPTUR" above both Capture and Aux.
> 
> I hope these steps are generalizable.  
> --Wendy
> 
> On Sat, Feb 19, 2005 at 05:26:06PM -0700, R. Keith Smith wrote:
> >I am having a similar problem. I get sound just fine in recordings and
> >live TV but it will not stop when I exit the program. I actually have to
> >reboot. I have tried those suggestions below with no success. My sound
> >card is built into the motherboard and is an intel of some kind. Any
> >other ideas?
> >
> >On Sat, 2005-02-19 at 16:20 -0500, Ralph Kitts wrote:
> >> I solved my problems with my Sound Blaster Audigy 2 ZS Sound Card.
> >> 
> >> I switched my cable from my Hauppauge WinTV Go card to the MIC input on
> >> my sound card instead of the LINE input on my sound card.  AlsaMixer
> >> showed a MIC output on the Playback screen and a MIC input on the
> >> Capture screen.  I set the MIC output on the Playback screen to 0 volume
> >> and the MIC input on the Capture screen to 75.
> >> 
> >> Now I hear sound when I watch TV, sound is recorded when I record TV,
> >> and sound stops when I exit TV.  This is the way it is supposed to work.
> >> 
> >> I could never get this to work by muting LINE on the Playback screen and
> >> turning up ANALOG MIX on the Capture screen.  I have no idea why this
> >> wouldn't work.
> >> 
> >> Ralph 
> 
> 
> _______________________________________________
> mythtv-users mailing list
> [email protected]
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to