modprobe ivtv -fb error durring pvr 350 tv out r5 10a instal
Hello, trying to get pvr 350 tv out working. I have had it working
before updating using r5 a10 but now after installing it i can't get
it up again. I have updated my ivtv file as well as my XF86Config-4
file (below) and upon reboot i get a message stating that x could not
start. The error that it is showing is that /dev/fb0 can not be found
which the pvr's frame buffer was the first time i ran modprobe to get
the tuner card reconized. (after that first time it would not run
again) with a segmentation fault when trying to run it
Ivtv
alias char-major-61 lirc_i2c
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 bttv
options ivtv ivtv_debug=1
#type=2 for NTSC only
options tuner type=39
options saa7127 enable_output=1 output_select=0
options msp3400 once=1 simple=1
add below ivtv msp3400 saa7115 saa7127 tuner
add above ivtv lirc_dev lirc_i2c ivtv-fb
config file
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "TV Screen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
FontPath "unix/:-1"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
# Auto-generated by KNOPPIX mkxf86config
Section "Monitor"
Identifier "NTSC Monitor"
HorizSync 30-68
VertRefresh 50-120
Mode "720x480"
# D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
DotClock 34.564
HTimings 720 752 840 928
VTimings 480 484 488 504
Flags "-HSync" "-VSync"
EndMode
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
ModeLine "640x350" 31.5 640 672 736 832 350 382
385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401
404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401
404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490
492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489
491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481
484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481
484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601
603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601
605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637
643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601
604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601
604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768
776 817 +hsync +vsync Interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771
777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865
868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961
964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025
1028 1072 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509
-HSync +Vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597
-HSync +Vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601
-HSync +Vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602
-HSync +Vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605
-HSync +Vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611
-HSync +Vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636
-HSync +Vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772
814 -HSync +Vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868
895 -HSync +Vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868
907 -HSync +Vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868
915 -HSync +Vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964
1001 -HSync +Vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964
1002 -HSync +Vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964
1017 -HSync +Vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025
1028 1085 -HSync +Vsync
EndSection
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "fbdev"
### change fb1 to whatever number you got in the previous section
Option "fbdev" "/dev/fb0"
### change the busid to whatever is reported by lspci. Note that
### output of lspci is hex, so add a preceding "0x" to the BusID
BusID "0000:01:08.0"
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "i810"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "TV Screen"
Device "Hauppauge PVR 350 iTVC15 Framebuffer"
Monitor "NTSC Monitor"
DefaultDepth 24
DefaultFbbpp 32
Subsection "Display"
Depth 24
FbBpp 32
Modes "720x480"
EndSubsection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
