Anyone have any ideas?
On Sun, 20 Feb 2005 00:40:17 -0500, Jason Blair <[EMAIL PROTECTED]> wrote: > I'm having a issue with my dual tuner setup. Both my ivtv and bttv > card think they are /dev/video0. Mythtv recognizes /dev/video0 as > only having the inputs of my bttv card and not the pvr-250. Trying to > swap the cards in my modprobe.conf and setting up the ivtv card as > 81-1 and the bttv card as 81-0 doesn't work. > > Can anyone offer any insight on how to fix this? If you need more > info please let me know. > > Thanks! > > [EMAIL PROTECTED] ~]# ll /dev/video* > lrwxrwxrwx 1 root root 6 Feb 19 19:27 /dev/video -> video0 > crw------- 1 mythtv root 81, 0 Feb 19 19:27 /dev/video0 > crw------- 1 mythtv root 81, 1 Feb 20 00:27 /dev/video1 > crw------- 1 mythtv root 81, 24 Feb 20 00:27 /dev/video24 > crw------- 1 mythtv root 81, 32 Feb 20 00:27 /dev/video32 > crw------- 1 mythtv root 81, 0 Feb 19 19:27 /dev/video4linux > > [EMAIL PROTECTED] ~]# dmesg | grep bttv > bttv: driver version 0.9.15 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 2) at 0000:01:0a.0, irq: 5, latency: 32, mmio: 0xdc000000 > bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb > bttv0: using: Hauppauge (bt878) [card=10,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] > bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > bttv0: Hauppauge eeprom: model=62471, tuner=Philips FM1236 (2), radio=yes > bttv0: using tuner=2 > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > bttv0: i2c: checking for TDA9887 @ 0x86... not found > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: registered device radio0 > bttv0: PLL: 28636363 => 35468950 .. ok > > [EMAIL PROTECTED] ~]# dmesg |grep ivtv > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc3e) loading > ivtv: Linux version: 2.6.10-1.760_FC3 686 REGPARM 4KSTACKS gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC16 based chip > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > ivtv: i2c attach [client=tveeprom[1],ok] > ivtv: Tuner Type 8, Tuner formats 0x00001000, Radio: yes, Model > 0x00893496, Revision 0x00000000 > ivtv: NTSC tuner detected > ivtv: Radio detected > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > ivtv: i2c attach [client=saa7115[0],ok] > ivtv: i2c attach [client=MSP3448W-A2,ok] > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware is buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Setting Tuner 8 > tuner: type set to 8 (Temic NTSC (4036 FY5)) by ivtv i2c driver #0 > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to NTSC. > ivtv: Initialized WinTV PVR 250, card #0 > ivtv: ==================== END INIT IVTV ==================== > ivtv: ivtv_enc_thread: pid = 4673, itv = 0xe0d18020 > ivtv: i2c attach [client=Hauppauge IR,ok] > > [EMAIL PROTECTED] ~]# /sbin/lspci -v > 01:08.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > Subsystem: Hauppauge computer works Inc. WinTV PVR 250 > Flags: bus master, medium devsel, latency 64, IRQ 11 > Memory at d8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 02) > Subsystem: Hauppauge computer works Inc. WinTV Series > Flags: bus master, medium devsel, latency 32, IRQ 5 > Memory at dc000000 (32-bit, prefetchable) [size=4K] > > 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio > Capture (rev 02) > Subsystem: Hauppauge computer works Inc. WinTV Series > Flags: bus master, medium devsel, latency 32, IRQ 5 > Memory at dc001000 (32-bit, prefetchable) [size=4K] >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
