Also, doesn't this line tell me that the ivtv card is /dev/video0? > ivtv: Initialized WinTV PVR 250, card #0
If I pull out the bttv card the ivtv card works fine on /dev/video0. I upgraded this machine to FC3 recently, before that with fc2 I had both cards working with the ivtv as video0 and the bttv as video1. On Mon, 21 Feb 2005 12:30:20 -0500, Jason Blair <[EMAIL PROTECTED]> wrote: > Yes, I have. I tried changing my modprobe.conf so that the ivtv card > was 81-1 and the bttv card was 81-0 but then when I try and setup > mythtv so that the ivtv card is on /dev/video1 all I get is a black > screen and a frozen machine. > > > On Mon, 21 Feb 2005 11:31:52 -0500, David George <[EMAIL PROTECTED]> wrote: > > On 2/20/2005 12:40 AM, Jason Blair wrote: > > > > >I'm having a issue with my dual tuner setup. Both my ivtv and bttv > > >card think they are /dev/video0. Mythtv recognizes /dev/video0 as > > >only having the inputs of my bttv card and not the pvr-250. Trying to > > >swap the cards in my modprobe.conf and setting up the ivtv card as > > >81-1 and the bttv card as 81-0 doesn't work. > > > > > > > > [snippage] > > > > >ivtv: Registered v4l2 device, streamtype 0 minor 1 > > >ivtv: Create DMA stream 1 > > > > > > > > This says that the ivtv card is really on /dev/video1. Have you tried > > setting MythTV to use /dev/video1 for the ivtv card? > > > > -- > > David > > > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
