On Mon, 2005-02-21 at 15:12, Michael Smith wrote: > I just did a new myth install on Suse 9.2 with running an Intel Pentium 4 > with a WinTv-PVR 350. However, I am having trouble getting Myth to > recognize my PVR-360 remote. I have verified that linux is recognizing the > ir signals using irw. I also have the latest remote config /etc/lircd.conf > :
I've just been through this myself. :) Assuming for the moment that irw shows you pressing the keys and they match up. The problem I had was the lircrc file. There were two points of confusion. First the lircrc file on Jarod's site (BTW: thanks for the How To Jarod!) is for the old gray Hauppauge remote. I have what appears to be the new gray Hauppauge remote. In another thread on this list several of us were having problems and via pointers there I found the missing/wrong key mappings and created the lircrc file below that seems to work for most things. Have not tested everything yet but it get it working so I don't have to hit the keyboard for most things now. The second thing is some confusion on where the lircrc file goes. At present I have the file in two places. /home/mythtv/.lircrc and /home/mythtv/.mythtv/lircrc. I came across information indicating one or the other is correct. I also found it may be a good idea to do the following when testing changes to the lircrc file. #service lircd stop #depmod -a #rmmod lirc_i2c #depmod -a #modprobe lirc_i2c #service lircd start This appears to make sure everything gets reloaded and reads the lircrc file (which ever one is really used). -- Scot L. Harris [EMAIL PROTECTED] Now I lay me down to sleep, I pray the Lord my soul to keep, If I should die before I wake, I'll cry in anguish, "Mistake!! Mistake!!"
# ~/.mythtv/lircrc # # MythTV native LIRC config file for # the grey Hauppauge remote # # By Jarod Wilson, 2003/12/21 # Amalgamated from Jeff Campbell's, # .lircrc, the mythtv.org docs, and # a few touches of my own. :) # # Channel Up begin prog = mythtv button = Channel-UP repeat = 3 config = Up end # Channel Down begin prog = mythtv button = Channel-DOWN repeat = 3 config = Down end # OK/Select begin prog = mythtv button = OK config = Space end # Play begin prog = mythtv button = Play config = Return end # Stop begin prog = mythtv button = Stop config = Esc end # Escape/Exit/Back begin prog = mythtv button = Back-Exit config = Esc end # Power Off/Exit begin prog = mythtv button = OFF config = Esc end # Red means stop! begin prog = mythtv button = RED config = Esc end # Pause begin prog = mythtv button = Pause repeat = 3 config = P end # Mute begin prog = mythtv button = Mute repeat = 3 config = F9 end # Fast forward (30 sec default) begin prog = mythtv button = Forward repeat = 3 config = Left end # Rewind (10 sec default) begin prog = mythtv button = Rewind repeat = 3 config = Right end # Skip forward (10 min default) begin prog = mythtv button = Next repeat = 3 config = PgDown end # Skip backward (10 min default) begin prog = mythtv button = Previous repeat = 3 config = PgUp end # Record begin prog = mythtv button = Record repeat = 3 config = R end # Delete begin prog = mythtv button = BLANK repeat = 3 config = D end # OSD browse begin prog = mythtv button = green repeat = 3 config = O end # Display EPG while in live TV, # View selected show while in EPG begin prog = mythtv button = Menu repeat = 3 config = M end # Scroll up begin prog = mythtv button = UP repeat = 3 config = Up end # Scroll down begin prog = mythtv button = DOWN repeat = 3 config = Down end # Scroll right begin prog = mythtv button = RIGHT repeat = 3 config = Right end # Scroll Left begin prog = mythtv button = LEFT repeat = 3 config = Left end # Bring up OSD info begin prog = mythtv button = Go repeat = 3 config = I end # Change display aspect ratio begin prog = mythtv button = FULL repeat = 3 config = W end # Seek to previous commercial cut point begin prog = mythtv button = yellow repeat = 3 config = Q end # Seek to next commercial cut point begin prog = mythtv button = blue repeat = 3 config = Z end # Numbers 0-9 begin prog = mythtv button = 0 repeat = 3 config = 0 end begin prog = mythtv button = 1 repeat = 3 config = 1 end begin prog = mythtv button = 2 repeat = 3 config = 2 end begin prog = mythtv button = 3 repeat = 3 config = 3 end begin prog = mythtv button = 4 repeat = 3 config = 4 end begin prog = mythtv button = 5 repeat = 3 config = 5 end begin prog = mythtv button = 6 repeat = 3 config = 6 end begin prog = mythtv button = 7 repeat = 3 config = 7 end begin prog = mythtv button = 8 repeat = 3 config = 8 end begin prog = mythtv button = 9 repeat = 3 config = 9 end ### MPlayer lirc setup # Show OSD begin prog = mplayer button = MENU repeat = 3 config = osd end # Pause playback begin prog = mplayer button = Pause repeat = 3 config = pause end # Skip ahead a minute if playing # If paused, resume playing begin prog = mplayer button = Play repeat = 3 config = seek +1 end # Stop playback and exit begin prog = mplayer button = Stop repeat = 3 config = quit end # Mute begin prog = mplayer button = Mute repeat = 3 config = mute end # Seek back 10 seconds begin prog = mplayer button = Rewind repeat = 3 config = seek -10 end # Seek forward 30 seconds begin prog = mplayer button = Forward repeat = 3 config = seek +30 end # Quit begin prog = mplayer button = Stop repeat = 3 config = quit end # Seek forward 10 minutes begin prog = mplayer button = Next repeat = 3 config = seek +600 end # Seek backward 10 minutes begin prog = mplayer button = Previous repeat = 3 config = seek -600 end # Toggle full-screen begin prog = mplayer button = FULL repeat = 3 config = vo_fullscreen end ### Xine lirc setup begin prog = xine button = Play repeat = 3 config = Play end begin prog = xine button = Stop repeat = 3 config = Stop end begin prog = xine button = OFF repeat = 3 config = Quit end begin prog = xine button = Pause repeat = 3 config = Pause end begin prog = xine button = Channel-UP repeat = 3 config = EventUp end begin prog = xine button = Channel-DOWN repeat = 3 config = EventDown end begin prog = xine button = Volume-UP repeat = 3 config = EventLeft end begin prog = xine button = Volume-DOWN repeat = 3 config = EventRight end begin prog = xine button = OK repeat = 3 config = EventSelect end begin prog = xine button = Menu repeat = 3 config = Menu end begin prog = xine button = Forward repeat = 3 config = SpeedFaster end begin prog = xine button = Rewind repeat = 3 config = SpeedSlower end begin prog = xine button = Volume-UP repeat = 3 config = Volume+ end begin prog = xine button = Volume-DOWN repeat = 3 config = Volume- end begin prog = xine button = Mute repeat = 3 config = Mute end begin prog = xine button = Menu repeat = 3 config = RootMenu end begin prog = xine button = Next repeat = 3 config = EventNext end begin prog = xine button = Pervious repeat = 3 config = EventPrior end begin prog = xine button = GO repeat = 3 config = OSDStreamInfos end begin prog = xine button = red repeat = 3 config = Quit end begin prog = xine button = red repeat = 3 config = Quit end
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
