Hi Again, Well, I think that my problems are legion.
I'm trying to start with OTA HDTV using Air2PC, 2.6.10 with dvb-kernel links, and mythtv from cvs (1 minute ago), with no additional patches. My problems stem from lack of info on what *correct* responses are supposed to look like and very little information on how to troubleshoot mythtv. 1) Reboots seem to set permissions inappropriately for /dev/dvb things and I haven't figured out udev to correct them (besides doing frequent chmods). 2) I'd like to verify that I have decent signal strength on a few channels before I begin. Azap seems to work; but I don't know what it's output is supposed to look like for sufficient signal strength for capture. 3) I'm totally lost on the channel configuration. I'm supposed to enter channels by hand, and then re-enter those channels by hand by their frequencies (as their transports...?)? I tried this with one station. I used the Scan Existing transports options. It flashed by, and I saw something saying "Signal Locked" but I didn't get any valuable feedback. 4) Following Wendy's suggestion from quite a while ago, I tried to start with small recordings. Any attempts to capture just result in empty .nuv files. 5) Trying to watch TV just gives me a black screen. Lord, what I wouldn't give for an error message. Thanks for any advice, Jean
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
