I got the same problem. The sound works if I select "Continue without audio" though, but annoying all the same. Noone been able to figure this one out? A rate entry in my .asoundrc doesnt seem todo anything.
Regards, Nils Henrik Tvetene > On Mon, 2005-02-21 at 23:06 -0500, Rick Ingersoll wrote: >> I am running out of my pvr350 card. I have set the audio to be >> ALSA:default. When I try to watch live tv, I get and error rate doesn't >> match. expected 0 and got 4400. Anybody know the solution? > > I posted the same question last week and got a private response from > Frank Riley: > I suspect the following thread in mythtv-dev is the culprit: > "audio init bug in NuppelVideoPlayer::StartPlaying". > I've not had a chance to check try out though. > > The problem is that myth is detecting an audio rate of 0 (somehow), > which is not supported by the sound hardware so the hardware gets set to > the minimum rate that it supports and that is what gives the error. > > I wasn't able to trace through the code to find where the 0 comes from > just by observation, I was planning to dig in with some debug stuff but > never quite got round to it. > > Ian. > > -- > Ian Campbell > > The first rule of intelligent tinkering is to save all the parts. > -- Paul Erlich > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
