On Wed, 23 Feb 2005 16:32:39 -0500, Andrew Gallatin
<[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
> The human readable vendor id and device name are pulled from a table
> (/usr/share/hwdata/pci.ids on my distro) based on the
> vendor_id:device_id tuple from PCI config space. You can use lspci -n
> to see the vendor_id:device_id tuple in its natural form. If
> something gets unseated (or there is an ESD discharge), and those bits
> are jumbled, you will see a different vendor and/or device.
Here's mine, if it helps:
00:08.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII
DVB chip / Technisat SkyStar2 DVB card (rev 02)
Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip
/ Technisat SkyStar2 DVB card
Flags: bus master, slow devsel, latency 128, IRQ 5
Memory at dfff0000 (32-bit, non-prefetchable) [size=64K]
I/O ports at ec00 [size=32]
[EMAIL PROTECTED] src]# lspci -n | grep 00:08.0
00:08.0 Class 0280: 13d0:2103 (rev 02)
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
