hi,
I'm trying to setup dual head using the m10000's onboard s3 (vga) and
the tv out of a pvr-350. I guess there is probably somewhere more
appropriate to ask about this but someone on this list must surely have
this working?
I have both listed in my xorg.conf but only one will start. If I swap
screen 0 and screen 1 around then the other works but I can't get both
to start together.
Am I doing anything obviously wrong?
Below is my xorg.conf
thanks
john
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
Option "Clone" "off"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name
of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules/extensions"
ModulePath "/usr/X11R6/lib/modules"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
# Load "dri"
# Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "PAL TV"
ModelName "Unknown monitor"
HorizSync 30.0 - 68.0
VertRefresh 50.0 - 120.0
ModeLine "720x576" 42.6 720 760 832 944 576 577 580 602
-hsync -vsync
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor 800x600"
HorizSync 31.5 - 35.1
VertRefresh 50.0 - 61.0
Option "dpms"
EndSection
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "ivtvdev"
BoardName "Unknown video card"
Option "fbdev" "/dev/fb1"
Option "ivtv" "/dev/fb1"
BusID "PCI:0:020:0"
Screen 1
EndSection
Section "Device"
Identifier "Videocard1"
Driver "via"
VendorName "Videocard Vendor"
BoardName "S3 UniChrome"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Hauppauge PVR 350 iTVC15 Framebuffer"
Monitor "PAL TV"
DefaultDepth 24
DefaultFbBPP 32
SubSection "Display"
Depth 24
FbBPP 32
Modes "720x576"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x600"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 25/02/2005
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
