On Sun, 27 Feb 2005 16:28:31 -0500, Chris Burgess <[EMAIL PROTECTED]> wrote: > I am hoping someone can help me with an output problem with my PVR350. > > I am using the video out on the PVR350 as the display for my system. > > I have the ivtv driver installed successfully and I am able to pump > video from my video in to my video out issuing the following command. > > # ivtvfbctl /dev/fb1 -alpha -on -globalalpha -nolocalalpha > # dd if=/dev/video0 of=/dev/video16 bs=64k > > If I do that I get the video signal from my cable in showing perfectly > on the television. > > I used the Wilsonet documents to setup my box and modified the initrd > as directed to have the PVR350 display everything right from boot. This > works but the video is mangled. Signal shows intermingled white lines > and a portion of the display repeated over and over. I can clear this up > by issuing the command: > > # ivtvfbctl /dev/fb1 -alpha -on -globalalpha -nolocalalpha > > but then I just get a black screen. > > Does anyone know what is going on or how to fix this? >
I had a similar problem, and when I rebooted and didn't put in the line to clear up the video and when it came back up all was well. Try rebooting and don't put in the last command. -- -=/>Thom
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
