On Mon, 28 Feb 2005, matt freymiller wrote: > This looks wrong as well. > > under Utilities/Setup, Setup, TV Settings, Playback: > > > > x Use the PVR-350's TV out/MPEG decoder > > Video device for the PVR-350 MPEG decoder: > > /dev/video16 > > Should be /dev/video0 from the looks of some of the > other info you gave. Again if you use the pearl tuner > you will be able to play with all of these settings > till you find the one that works.
That is incorrect. /dev/video16 is the DECODER device. That's that that setting is for. If you set that to /dev/video0, your OUTPUT witll try to write to your tuner. The PVR-350 OUTPUT on a 1-card system should be /dev/video16. To the OP, can you get any output from the /dev/video16 device? Have you tried the dd if=/dev/video0 of=/dev/video16 bs=64k test? Do you get output then? Chack this thread: http://gossamer-threads.com/lists/mythtv/users/100064 -- Mark Matula Mikey, you will be missed: http://eblo.ratula.net/mikey.html
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
