We've just upgraded our Mythbox from SuSE 9.1 to 9.1. We had *enough* trouble trying to get TVout on our Radeon 9200SE clone to work in the first place; ATI's 3.14.6 drivers will do TVout just fine (in fact, we scarcely had any trouble on the TVout side -- the card syncs up from boot, automagically), but they don't seem to do Xv overlay properly. All we get is a navy blue panel on the screen, where the video is supposed to be, no matter how we set up the configuration file.
Notably, *those* drivers won't work with a configuration file which works just fine on ATI's 3.9.0 drivers. Well, come along 9.2, and now we've got Xorg 6.8.1, instead. And there are two ATI driver releases for it: 8.8.25 and 8.10.19. Both give me the Big Blue Band. I've tried playing with several config file options I found in postings on the net, including PseudoColorVisuals (which was already off), and XaaNoOffScreenPixmaps (which the driver ignores). No luck. My sister is at the end of my rope (it's her box). I'm about to rip Xorg out by the roots, and go back to the 4.3.99 that was in 9.1 (which will not be especially pleasant), unless anyone has the magic bullet. I'll listen happily to suggestions, but I'd really like to hear "Sure; I'm doing this: here's my config file". :-) Cheers, -- jra -- Jay R. Ashworth [EMAIL PROTECTED] Designer Baylink RFC 2100 Ashworth & Associates The Things I Think '87 e24 St Petersburg FL USA http://baylink.pitas.com +1 727 647 1274 If you can read this... thank a system adminstrator. Or two. --me
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
