Not sure if this is what you're looking for, but here goes. I was reading through the <a href="http://www.eff.org/broadcastflag/cookbook/guide.php";>EEF HTPC Guide</a> earlier today, and it contained this bit of info (read Section 6):
<i>"You'll want to configure a lineup with only digital channels for the pcHDTV card. (If you have a second tuner card that receives NTSC channels, you can create a lineup for it in a neighboring ZIP code; currently it is difficult to use a lineup that mixes ATSC and NTSC channels. Therefore, you should unselect all channels before beginning to create your lineup.)"</i> Indeed, while having a "merged" ATSC + NTSC lineup messes things up in MythTV, you could create an all-digital listing for your ATSC-mapped device and put all the regular broadcast channels on your NTSC-mapped device. If it works, lemmie know =) On Sat, 05 Mar 2005 10:35:28 -0600, Craig Eaton <[EMAIL PROTECTED]> wrote: > I recently setup my HD3000 card, and its working well in both the > ATSC and NTSC modes. To make this work in mythtv, I setup the HD3000 > card to look like two different capture cards. > > My myth setup currently has one capture card entry for the ATSC mode > (which points to /dev/dtv0), and a second for NTSC mode (which points to > /dev/video0). Since the two capture card entries use the same hardware, > they obviously can't be used at the same time. > > Is there any way to get MythTV to understand this, so it won't try > recording two simultaneous shows with the same capture card? > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
