Hi, I had the same problem.
I just upgraded to mythtv 0.17, kernel 2.6.11 and air2pc (replaced the HD-3000 for alleged better reception). The channel scan in mythtv setup found 5 subchannels for a ATSC channel (PBS) with strong signal, and I know all of them exists in the air since I could receive all of them in mythtv 0.16 using HD-3000 (V4L driver), but now I can never tune to subchannel 5 due to this "Timeout Getting PMT" issue. All other 4 subchannels work fine. I did not try the "azap" the "dtvscan" since I don't know how to create my own frequency/channel table (the script did not work for me), so I am not sure whether this is a driver problem or mythtv problem. Really hope somebody can shed some light on this issue because most of the time that missing channel is the only channel I care, and is the only channel that carries HD-signal in the five subchannels. Thanks in advance for any suggestions/fixes. Warren > Date: Sun, 27 Feb 2005 12:22:33 +1100 > From: MythTV <[EMAIL PROTECTED]> > Subject: [mythtv-users] Error tuning. Cant get PMT's > To: [email protected] > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain > > Hi all, > > Been at this MythTV thing for a while now, and am starting to make > headway, however am stuck getting an error during channel tuning > (despite being able to tzap, and dvbscan manually fine): > > Starting up as the master server. > 2005-02-27 11:52:41.249 DVB#0 DVB SI Table Parser Started > 2005-02-27 11:52:41.250 DVB#0 Using DVB card 0, with frontend Philips > TDA10045H DVB-T. > 2005-02-27 11:52:41.252 DVB#0 DVB Signal Monitor Starting > 2005-02-27 11:52:42.331 DVB#0 DVB signal c5c5 | snr 1515 | ber 1fffe | > unc 0 > 2005-02-27 11:52:43.470 DVB#0 DVB signal c5c5 | snr cece | ber 1fffe | > unc 0 > 2005-02-27 11:52:44.502 DVB#0 DVB signal c5c5 | snr 3f3f | ber 1fffe | > unc 0 > 2005-02-27 11:52:45.518 DVB#0 DVB signal c5c5 | snr 2b2b | ber 0 | unc 0 > 2005-02-27 11:52:46.563 DVB#0 DVB signal c5c5 | snr d3d3 | ber 0 | unc 0 > 2005-02-27 11:52:46.954 DVB#0 Signal Locked > 2005-02-27 11:52:47.186 DVB#0 Status: LOCK. > 2005-02-27 11:52:47.187 DVB#0 Multiplex Locked > 2005-02-27 11:52:53.207 DVB#0 Timeout Getting PMT > 2005-02-27 11:52:53.207 DVB#0 ERROR - Tuning for channel #3 failed. > 2005-02-27 11:52:53.281 mythbackend version: > 0.17.20050130-1www.mythtv.org > > Can anyone offer any advice for how I might resolve this issue? > > As can be seen from the 'scan' output below (which was run during > mythbackend startup just to be sure it was locking properly: > > [EMAIL PROTECTED] scan]# ./dvbscan -c > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > 0x0000 0x093e: pmt_pid 0x010a PRIME -- PRIME Newcastle (running) > 0x0000 0x096a: pmt_pid 0x01cc PRIME -- PRIME View 1 (running) > 0x0000 0x096b: pmt_pid 0x01cd PRIME -- PRIME View 2 (running) > dumping lists (3 services) > PRIME Newcastle (0x093e) 01: PCR == V V 0x0a64A 0x0a65 (eng) > TT 0x0a69 > PRIME View 1 (0x096a) 01: PCR == V V 0x0a64A 0x0a65 > PRIME View 2 (0x096b) 01: PCR == V V 0x0a64A 0x0a65 > Done. > > Cheers, > Greg. >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
