On Tue, 08 Mar 2005 09:00:28 -0800, Rei Toi <[EMAIL PROTECTED]> wrote: > Hi Kees, > > FWIW, I had the same issue until I completed the entire setup in Jarod's > guide: > > http://wilsonet.com/mythtv/ > > I had to do my setup over several sessions and I shut down the system > along the way. When I would restart the system during this period I had > the same problem. > > Once all of the changes/adds that Jarod specified were made to > /etc/modprobe.conf it started working like a charm, especially this > addition in the section on "Using the IR port on a PVR-x50": > > "Add this line to the bottom of modprobe.conf, which should ensure ivtv > is loaded before lirc_i2c, so we can access the i2c bus on the ivtv card:" > > install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install > lirc_i2c > > HTH > > -Rei.
Of course if one does not use lirc (for instance instead uses the ati_remote standard kernel module), then the above does not apply. That is for those who are using the Hauppauge remotes with non-MCE cards.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
