Jason,
I'm running this card on a stock 2.6.10 kernel. These are the modules I had to enable to get the card to work:
CONFIG_VIDEO_BT848=m CONFIG_VIDEO_CX88=m CONFIG_DVB=y CONFIG_DVB_CORE=m CONFIG_DVB_BT8XX=m CONFIG_DVB_SP887X=m CONFIG_DVB_NXT6000=m CONFIG_DVB_MT352=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_BUF=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR=m
Until 2.6.10 I was using Chris Pascoe's patches but found that 2.6.10 had them. I'm not sure that all of these modules are needed. The NXT6000 was necessary as the bttv-bt8xx module won't load without it due to an unresolved symbol.
I sent the above list of modules to Chris but didn't hear anything back so I assume they're all required.
Steve.
jason bright wrote:
Any australians out there have a sample config script to get a
correctly recognized fusionHDTV lite under an unpatched 2.6.10-776?
(all the appropriate bits are supposed to be in the kernels >=2.6.9). lspci shows the card there correctly. It's just bringing up the driver
and getting the device entries populated.
I've spent a couple of days banging on this to get it to work. I think I got it successfully once ( /dev/dvb/adapter0 present and MythTV recognizing the DVB card properly) but lost it after a reboot and I haven't been able to recreate it. ARRRGH!
I've been using Jarods guide, Martin Smiths DVB setup guide, Jani Talikka's DVICO DVB guide, and Chris Pascoe's pages (author of the card driver).
Any help appreciated! thx j
------------------------------------------------------------------------
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
