These are the lines from Jarod's Guide I am using to grab lirc: # apt-get install lirc-kmdl-$KVER # apt-get install lirc
So you are saying there is a specific lirc-kmdl... for USB? I can start the LIRC daemon without problems...but I really need to know how to setup the USB receiver and where I should get these packages from. Thanks! On Tue, 8 Mar 2005 11:11:31 -0700, Vladimir Shved <[EMAIL PROTECTED]> wrote: > You don't need any LIRC modules, lirc_serial is for com port IR devices, you > need kernel driver module(forgot its name) for USB UIRT and actual LIRC > daemon(lircd) needs to start on startup(need script in /etc/init.d and link > to it like from /etc/rc2.d etc.). Actual LIRC must have USB UIRT support, > you need to build LIRC from sources, I'm not sure if there are any binaries > exists that support USB UIRT. When building from sources, either you need > patch or get latest CVS sources. I did not try CVS but I've read somewhere > that USB UIRT made to CVS, so it has to be supported. Check USB UIRT support > forums, LIRC mail list for more info. > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > Sent: Tuesday, March 08, 2005 10:57 AM > > To: Discussion about mythtv > > Subject: Re: [mythtv-users] USB IR Receiver > > > > But what are the lines that I will need in my modprobe.conf? This is > > what I have so far in it (from Jarod's guide) > > > > alias char-major-61 lirc_serial > > options lirc_serial irq=4 io=0x3f8 > > install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ > > /sbin/modprobe --ignore-install lirc_serial > > > > Instead of lirc_serial, will it be lirc_usb? I have no idea. Thanks! > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
