Hi Mike, Any chance you can run through what you did to make this work?
I tried it today but it messed up my system. I kept getting errors starting X - something about No V_BIOS. I had to revert to my old xorg rpm's I'm trying to get it working with an M10000 using the on board S3 chip and a pvr-350. Thanks John > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Michael Arndt > Sent: 10 March 2005 04:15 > To: [email protected] > Subject: [mythtv-users] Re: Running two X servers (with > PVR350) at the sametime? > > > Thanks for the tip John! Hearing that you had this working > got me thinking about a web page I found earlier, but never > finished reading through...this was the one: > > http://cambuca.ldhs.cetuc.puc-rio.br/multiuser/ > > The bottom of that page leads to this link for a patched xorg > rpm for FC3: > > ftp://ftp.linux.cz/pub/linux/people/jan_kasprzak/xorg-dualhead/ > > I installed that and followed the examples given in the > README and gdm.conf on the above link, and I'm up with mythtv > running on one display while I type on my desktop using > another X display! Sweet! > > For some reason, one of the X servers runnig is pegging my > CPU at 97% though. Not sure why that is, but I'll live with > it for now unless anyone has a solution. > > Just wanted to get this email out so it was searchable in the > archives. Sorry I couldn't respond to the real thread - I > subscribed in digest mode without thinking about it :(. Thanks again! > > Mike > > > I run my second X server which is a patched XFree so > > that it doesnt worry about Virtual Terminal switching. > > So this one just runs and the other normal desktop one switches off > > when you switch terminals away from it. > > > I'll try to dig out the patch i used later (or i can > > send you a pre-built x server if you like). > > > > John > > > > --- Michael Arndt <[EMAIL PROTECTED]> wrote: > > > Hello, > > > > > > I'm a long time linux user, but new to mythtv. > > > After following Jarod's great > > > guide, and using the archives of this list, I have > > > mythtv up and running! > > > > > > I've got a FC3 system with a PVR350 and an old > > > voodoo3 card in it. I'd like to > > > run two X servers at the same time - one on the > > > voodoo3 for my desktop work, > > > and obviously mythtv on the PVR350. I've got my > > > xorg.conf setup with two > > > two ServerLayout sections, and I modified gdm.conf > > > to connect to both X > > > servers. All of this works fine, *but*, it seems I > > > can only use one of the > > > X servers at a time. If I Ctrl-Alt-F8 over to my > > > desktop X display running > > > on my voodoo3, mythtv stops running on my PVR350. > > > If I Ctrl-Alt-F7 back, to > > > make my PVR350 X display work, mythtv works fine, > > > but I obviously then can > > > not use my desktop display. > > > > > > So...any ideas? I'm thinking there must be other > > > people out there who use > > > the same system for mythtv and desktop work? I read > > > one post from the > > > archives indicating that only one X server can be > > > active at a time, but the > > > post was rather old, so I don't know if this is > > > still the case or not. Let me > > > know if you want to see my xorg.conf or gdm.conf, or > anything else! > > > > > > One other thing - when I log in on the voodoo3 > > > display, I get a bunch of > > > gnome errors about the gnome-settings-daemon quiting > unexpectedly. > > > Any ideas on that? I am trying to run gnome on my voodoo3 > > > display, and I have > > > Windowmaker running on the PVR350 display. > > > > > > Thanks! > > > > > > Mike > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.7.1 - Release Date: 09/03/2005 > > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.1 - Release Date: 09/03/2005
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
