On Thu, 17 Mar 2005 07:10:54 GMT, Tom Hughes <[EMAIL PROTECTED]> wrote: > In message <[EMAIL PROTECTED]> > Mark Smith <[EMAIL PROTECTED]> wrote: > > > I have a new Myth box which (for the moment) I'm currently setting up one > > VisionPlus DVB-T card. > > > > I've managed to get a signal lock using the DVB tools: > > > > [EMAIL PROTECTED] util]# szap/tzap "BBC ONE" > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > reading channels from file '/home/mythtv/.tzap/channels.conf' > > tuning to 505833330 Hz > > video pid 0x0258, audio pid 0x0259 > > status 00 | signal 0000 | snr 0000 | ber bfe4b244 | unc 00a7ac19 | > > status 1f | signal 3f00 | snr 5000 | ber bfe4b244 | unc 00a7ac19 | > > FE_HAS_LOCK > > status 1f | signal 3f00 | snr 5000 | ber bfe4b244 | unc 00a7ac19 | > > FE_HAS_LOCK > > status 1f | signal 3f00 | snr 5000 | ber bfe4b244 | unc 00a7ac19 | > > FE_HAS_LOCK > > > > However, mythtvsetup seems unable to scan the channels, despite being given > > the correct starting frequency (50583330 Hz): > > Did you fill in all the other tuning parameters correctly? It isn't > just the frequency you need to set, but the other 7 or 8 parameters > on that screen as well. > > Tom > > -- > Tom Hughes ([EMAIL PROTECTED]) > http://www.compton.nu/ > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > Some of them you can leave as auto, but yes you need to set other parameters like the QAM.
-- Regards, ~CM _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
