Someone started this thread a while back: > St�le Undheim wrote: > >> After some problems I finally got sound working in video4linux. Sound >> is through a cabel into line-in on my soundcard. The TV card is >> pinnacle PCTV pro - running linux debian sid 2.6.9-1-686. It works >> fine in tvtime and xawtv, but not in mythtv. >> >> The first thing I found that I should correct was to set the recording >> flag on line-in, and mute it. I did this. Then I tried tvtime again, >> no sound, as expected. But if I do aplay /dev/dsp I get the tv-sound, >> although a bit delayed. > > Good. That means that it is recording and playing back the > digital data correctly. > >> In mythtv I have /dev/dsp as the sound device, but still no sound. > > There are two places you should check. In the backend setup > program "Capture cards" section you need to set "Audio device" > to /dev/dsp for recording. In "mythfrontend" Setup->General > page 3, you need to set "Audio output device" to /dev/dsp for > palyback. > > -- bjm
I have the same problem, and I have done the same things, all my devices are set to /dev/dsp and I still can't hear the sound in mythtv. Permissions are ok and my mixer is set to: $ amixer set Master,0 100%,100% unmute $ amixer set PCM,0 100%,100% unmute $ amixer set CD,0 75%,75% mute captur <-- NOTE The CD $ amixer set Capture,0 100%,100% captur $ su # alsactl store # exit $ Any idea? -- Marcelo Toledo [EMAIL PROTECTED] http://www.marcelotoledo.org Mobile: 55 71 9116-1101 _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
