On Sun, Mar 20, 2005 at 10:34:10AM +0000, Mark Smith wrote: > I am in the process of setting up a MythTV 0.17 system on FC3, with two DVB-T > cards - one VisionPlus Mini Ter and one Avermedia 771 card. > > I have a peculiar problem in that the VisionPlus card can happily receive UK > mux 1 (e.g. BBC 1), but seems to be unable to get a lock on that mux when > initially starting the backend. > > i.e. I can tune to, say, BBC1, come out of Myth and restart the backend - it > then fails to get a lock unless I go into mythtvsetup and change the starting > channel to a different mux. If I do that it starts fine. > > Any ideas? This may be signal strength related as I have bigger problems with > that mux on the Avermedia card. However, if it can get a lock to display a > channel on mux 1, why not when starting the backend first off?
Can you reproduce this with plain tzap? If so, please enquire on the [email protected] mailing list. I have a similar problem with a Nova-T-like card, which won't tune one particular channel first. I use dvbtune from an init script to tune to a known good one so that I can guarantee mythbackend will start successfully. I can reproduce this with tzap (it's not a myth issue). Hamish -- Hamish Moffatt VK3SB <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
