On Thu, 2005-03-24 at 22:42, Nick wrote: > > As long as there are inputs defined for the card and they are attached > to the input(s) this should be OK. (Check this thread for more details > http://www.gossamer-threads.com/lists/mythtv/users/54074) However, if > you can afford to remove the capture card settings altogether and the > redefine both cards it may help if there is a DB problem. > > Are you able to cat both /dev/video0 and /dev/video1 into an mpg or > directly into mplayer from the command line as per Jarod's guide? If > not, the problems are at a lower level than a problem with myth and > need to be sorted before myth can be fixed. (These could be udev or > modules.conf related to the ivtv driver options)
I tried a couple of times using mythtvsetup, removing all capture cards and redefining them. Had to do that a couple of times before I was able to get video0 and video1 selected. I did run the dd test and was able to capture video using both devices so the low level stuff seems to work. The error log entries makes me believe there is still a setting somewhere that has video0 for both devices. I will try removing and redefining both capture cards again just to make sure. Well I just tried it again for at least the fourth or fifth time. This time it appears that it is able to record on both cards. Confirmed this using the pip and starting recording on two different channels. I think the problem has resolved itself. Not sure exactly how or why. Thanks for the help. -- Scot L. Harris [EMAIL PROTECTED] You will be given a post of trust and responsibility.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
