Hi Greg, Thanks for the advice. Do you have any ideas whether the dvb/adapter0/video should have a trailing 0 or not ? In some mailings it does have a zero and others it does not.
Best regards Niels Dybdahl ----- Original Message ----- From: "Greg Cope" <[EMAIL PROTECTED]> To: "Discussion about mythtv" <[email protected]> Sent: Sunday, March 20, 2005 3:19 PM Subject: Re: [mythtv-users] MythTV does not recognize my Twinhan DVB card > You need to: modprobe dvb-bt8xx to get the devices to appear (but do > this at the end as you need to do the following 1st) > > You' also need to > > /usr/sbin/groupadd video > /usr/sbin/usermod -G video mythtv > Add the following to the end of: /etc/udev/permissions.d/50-udev.permissions > # DVB devices > dvb/*:$local:video:0660 > dvb:$local:video:0660 > dvb/adapter*:$local:video:0660 > > The devices should now have the right perms too. > > You might need to add the modprobe to a start script to get them to > appear at boot. > > my 2 pence worth > > greg > > On Sun, 20 Mar 2005 14:52:58 +0100, Niels Dybdahl <[EMAIL PROTECTED]> wrote: > > > > Hi, > > > > I am running MythTV 0.16 on FC3. > > I have recently added a Twinhan VisionPlus 1022 card, which is recognized by > > FC3 according to messages. > > However when I run mythtvsetup, it states that it does not find any DVB > > devices. > > I have noticed that there were no entries below /dev/dvb, so I found: > > http://www.rsmas.miami.edu/personal/angel/mythtv/air2pc-howto.html > > which suggest to use mknod to create devices in > > /etc/udev/devices/dvb/adapter0. (audio0, ca0, demux0, dvr0, frontend0, net0, > > osd0, video). Do I need the same devices for a VisionPlus board ? And why is > > the video device without a trailing 0 while the others contain a zero ? > > > > However I tried to do the same. I now get devices in /dev/dvb after reboot, > > but MythTV still does not find any DVB device. What does MythTV look for ? I > > would appreciate if somebody could describe briefly how the driver interface > > works. I do not understand how MythTV could communicate with a driver via > > the /dev/dvb entries, if the driver itself has not created those entries. > > > > I also read that MythTV 0.17 has better DVB support, so would there be any > > chance that my problems disappear after an upgrade ? > > > > My best guess is that I miss something in my modprobe.conf. Does anyone run > > a VisionPlus card on FC3 and want to share his modprobe.conf ? > > > > Best regards > > Niels Dybdahl > > > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
