More info: After reverting back to a 0.16 build, the thing works just fine using just the bttv card. Tomorrow I will have to see if I can also get the saa7134 working along side it with 0.16...
Thanks for any additional insight! On Thu, 24 Mar 2005 15:24:48 -0700, Chad <[EMAIL PROTECTED]> wrote: > :D > > Thanks ;) > > I do have the bttv card working elsewhere, yet even if that is the > only card in the box now, mythsetup doesn't seem to want to configure > it. > > Thanks for the reply! > > > On Thu, 24 Mar 2005 16:18:42 -0600, Kevin Kuphal <[EMAIL PROTECTED]> wrote: > > Chad wrote: > > > > >When I tried to finally configure/add the second card, I started > > >running into all kinds of problems. I'd modprobe up the saa7134 module > > >using every combination of the card= tuner= options (read on the > > >internet it was required for this card) but nothing worked. Then, to > > >worsen matters, the bttv card no longer produced video either! I > > >though, what a great time to do an update to see if it was just a > > >problem in 0.16 > > > > > > > > > > > Get your card working in Linux first (/dev/video1, xawtv, etc) before > > you try working it with Myth. It's like you're trying to run Windows > > Movie Maker without having the card drivers installed first. > > > > Kevin > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
