I found, after the initial scan, a re-scan of each individual transport picked up some further channels. (Option under Channel Setup)
Alternatively you can direct the output from dvbscan to a file. Then insert the various settings (QAM, FEC, etc, etc) into the channel setup manually. The channel scan in Myth 0.17 certainly doesn't seem as reliable as dvbscan, but it is a lot better than 0.16! > Hi, > > Done this so far: Dropped the mythconverg database, compiled the 0.17 > (CVS) and ran the myth-setup. In the myth-setup I managed to run the > Full Search for channels (didn't find all of the channels but few of > them from one of the channel chunks). To verify the hw & driver > functionality I tested dvbscan & xine dvb:// combination -> all channels > were found and watchable. > > Channels the 0.17 myth-setup found are fully watchable, but the ones > it didn't find I can not add by hand (not with myth-setup). Any tips how > I could add those missing channels to 0.17 by hand ? > > > Thank you very much for the information, > -Mika > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
