if you place the .rules and .permissions files within the udev subdirectory in the 2.0 pchdtv driver in the /etc/udev/rules.d and /etc/udev/permissions.d this should automatically setup the correct devices for you.
for me with the 2.0 driver, i think i get the hd3000 as /dev/video1 when i modprobe cx88-atsc. this may be because i have a pvr250 as /dev/video0. -Adam On Tue, 29 Mar 2005 13:08:40 -0800, Villalovos, John L <[EMAIL PROTECTED]> wrote: > SacTwoThirtyEight wrote: > > I then try and run the 'dtvsignal /dev/video0 xx' or 'dtvsignal > > /dev/video4linux xx' (where xx is a frequency assignment for dtv > > stations in my area - I do not know which to link to /dev/dtv ). I > > then get the 000 for the signal strength. I'm sort of lost on what > > other options to try next. I'm not even sure if I've screwed things > > up by trying both versions of the pcHDTV software from the CD and the > > website. I have seen other web sites that have "install" install > > instructions but they are either not for FC3 or 2.6.10 or are so > > vague, this poor midnewbie can't quite comprehend them. I'd like to > > thank everyone ahead of time ... this i! s a great forum with > wonderful > > experts with vast amounts of knowledge. > > Take this with a grain of salt since I have NOT yet got mine working. > > But the HDTV signal should be on /dev/video32 from what I have read. > > Please correct me if I am wrong on this. > > John > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
