The best post I've found so far is here: http://www.gossamer-threads.com/lists/mythtv/users/118579?search_string=3000;#118579
It has specific instructions for setting up modprobe.conf, and for making sure that the drivers are loaded in order. The initial load commands go into /etc/ rc.d/rc.local. This got me past the Fatal Error messages when I run # modprobe cx8800. /dev/video32 is now available and mythtvsetup recognizes it. Beyond that I haven't been able to tune any channels over my HD-3000, and my PVR-250 seems to be stuck on one channel with the right third of the image cutoff. If you have any luck, let me know. --Ken Also, try looking through [EMAIL PROTECTED] 's postings on the archive site. Gregg's been trying to work through the HD-3000 install for most of the month. So, you can see what's worked and what hasn't for him and other people by following his threads. > From: "Kelly" [EMAIL PROTECTED] > Sent: Tuesday, March 29, 2005 8:41 AM > Subject: RE:Need Help with FC3 pcHDTV HD-3000 Install > > Did you get a reply? > > I'm have similar problems with the cx88-dvb not loading up. Had almost > the same mesg. > > kel _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
