>> How can I tell myth to identify 82-1 and 82-2 as two channels? >> I am unable to locate information on this on in the archive and >> http://www.digitalregime.com/mythdvb/setup/ provides no assistance on this. > >I don't have a 3k card, I have an Air2PC, However, I would expect this >to be the same. > >In mythtv-setup, run a DVB-scan. It will then add the channels, likely >as 821 and 822. You can either leave it that way (which makes entering >channels MUCH easier) or you can change it, like I did, so I have to >co-exist with non-HD channels, to 82_1 and 82_2 in the list. It's >impossible to hand enter without a real keyboard, but they show up >consecutively in the list, and I can flip through them..
That's the problem. The scan fails to tune any channel. It locks on all the Digital channels but reports "failed to tune" or a timed out message then proceeds to the next channel. Dvbstream works just fine with capturing the TS and dtvstream will split them by program. However this negates the purpose of the PVR. Granted my pvr-350 is working fine for the analog channels. I'm hoping someone can help me by telling me how to enter the channels manually or point me to a patch that will allow me to select PID's in setup.. Even thou I am using the DVB driver and using DVB as the input type myth says that the card is using video for linux and will not diplay the DVB setup page. The VL page where I can manually enter the frequency for the channel lacks places to designate PID's all it has is the Freq and color contrast brightness etc adjustments. In other words I do not get to see these pages http://www.ethics-gradient.net/myth/images/chaned_dvb.jpg http://www.ethics-gradient.net/myth/images/tchaned_pid.jpg These are found on the guide found here http://www.ethics-gradient.net/myth/mythdvb.html
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
