On Thu, 31 Mar 2005 00:51:19 -0800, Jarod Wilson <[EMAIL PROTECTED]> wrote: > On Wednesday 30 March 2005 23:11, Big Wave Dave wrote: > > So, I picked up a FireWire card to give this all a shot. Everything > > seems fine in Dmesg and FC3 recognized the card on boot. > > I compiled 6200ch and tried to run it, but it says it can't find it. > > Here's the output of "plugreport" and "6200ch": > > > > Host Adapter 0 > > ============== > > > > Node 0 GUID 0x0011060000003348 > > ------------------------------ > > libiec61883 error: error reading oMPR > > libiec61883 error: error reading iMPR > > > > Node 1 GUID 0x0012c9fffe372faa > > ------------------------------ > > oMPR n_plugs=1, data_rate=2, bcast_channel=63 > > oPCR[0] online=1, bcast_connection=0, n_p2p_connections=0 > > channel=0, data_rate=2, overhead_id=0, payload=376 > > iMPR n_plugs=0, data_rate=2 > > > > [EMAIL PROTECTED] contrib]# ./6200ch -v 704 > > node 1: vendor_id = 0x000012c9 model_id = 0x0000620a > > Could not find Motorola DCT-6200 on the 1394 bus. > > If you haven't already, try 6200ch from cvs, there are a number of additional > vendor IDs added after the 0.17 release. If that still doesn't work, adding > the vendor ID for another box is trivial. > I downloaded the latest from CVS. However it still didn't work. So... I just added my vendor_id and one other line, and now it works like a charm! Perhaps someone should add my vendor_id to CVS? It is listed above, and was for a "DCT-6200/2005" for Comcast in the San Francisco Bay Area.
Thanks, Dave ---------------------------------------------------------------- Are Your Friends Lemmings? -- http://www.lemmingshirts.com _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
