Ryan A. Carris wrote:
On Wed, 30 Mar 2005 23:54:02 -0400, Rick <[EMAIL PROTECTED]> wrote:
I've been using a learning remote instead of going the lirc route.
Worked fine on FC1 but on FC3 not so perfect. The keyboard works
perfectly but when using the remote (an HTR-2) only the first key press
of each button works, subsequent presses do nothing although you can see
that the remote is sending. It's got me baffled, tried relearning,
resetting the remote, rebooting but always the same result.
(snip)
I had this problem when I moved from Mandrake 9 to FC3. Also had the
problem where a keypress on the remote will cause it to repeat until I
hit a key on the actual keyboard. I can't tell you how I've fixed it,
but I have. I usually hit too many buttons at once to tell you which
one did the trick.
Try playing around in the KDE control center with the keyboard repeat
settings. I think the "restore defaults" button is the key. Try
that, then apply, and maybe a reboot. If that doesn't work, just keep
trying different things. After about an hour, you'll get it to work
and not know why -- it always does for me. :)
Good luck.
-rac
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
That was it, restore defaults in keyboard under kde control center. I
calculate it took about 3ms so you saved me an hour :-)
Rick
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
