|
All,
I have a USB Logitech Wingman Rumblepad and
a USB Microsoft Sidewinder Pro. When I use the Microsoft one with zSNES
it's always detected the same. What I mean by that is, when you run zsnes
with a joystick plugged in it spits out a line that says how many axis, buttons,
hats, and balls it has. I can see the zsnes output when I run it
from mythfrontend in the mythfrontend log file. When I run zSNES
from a command prompt with my Rumblepad plugged in it gives me
this:
---- zSNES executed from the command prompt
----
$ /usr/local/bin/zsnes -cs -z -r 3 -m -j
"/games/MyGame.smc"
Hello the gui should now be off. ZSNES vPre 1.43, (c) 1997-2005, ZSNES Team Be sure to check http://www.zsnes.com/ for the latest version. Please report crashes to [EMAIL PROTECTED]. ZSNES is written by the ZSNES Team (See
AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; please read 'LICENSE.TXT' thoroughly before doing so. Use ZSNES -? for command line
definitions.
File opened successfully!
Device 0 Logitech Inc. WingMan RumblePad 7 axis, 10 buttons, 0 hats, 0 balls ---- done with execution ---- Now, the weird thing happens when I run
zSNES from mythfrontend with the same device still plugged in. When I
choose MyGame, it gives me this:
---- zSNES executed from mythfrontend
----
/usr/local/bin/zsnes -cs -z -r 3 -m -j
"/games/MyGame.smc"
Hello the gui should now be off. ZSNES vPre 1.43, (c) 1997-2005, ZSNES Team Be sure to check http://www.zsnes.com/ for the latest version. Please report crashes to [EMAIL PROTECTED]. ZSNES is written by the ZSNES Team (See
AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; please read 'LICENSE.TXT' thoroughly before doing so. Use ZSNES -? for command line
definitions.
File opened successfully!
Device 0 Logitech Inc. WingMan RumblePad 5 axis, 9 buttons, 1 hats, 0 balls ---- done with execution ---- Notice the weirdness? It totally
changed all the device controls! When I try to set up my rumblepad from a
command prompt, and then use it in mythgame it doesn't work correctly. I
think it's due to this but I don't know how to fix it. I used all the same
switches in my command prompt run so it should be similar. I thought maybe
it was joystick navigation in myth conflicting with mythgame so I tried
recompiling with the --disable-joystick-menu but it didn't help. Could
mythfrontend/mythgame be affecting how the joystick is detected in
zSNES??
Thanks,
-Greg
--- Running Conditions ---
939pin Athlon 64 3200+
OS - Standard Issue Debian (32-bit) MythTV - CVS Version (last updated 3/31/2005) Capture Card - pcHDTV HD-3000 Drivers - Using DVB (kernel 2.6.11.5) |
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
