Marc Tousignant wrote:
John,
The transports page gets filled out during the scan. However, what is shown on the dvb transport editor page is 561000000 Hz (0) (0) (0) 567000000 Hz (0) (0) (0) 573000000 Hz (0) (0) (0) 579000000 Hz (0) (0) (0) 585000000 Hz (0) (0) (0) Etc..
When I chose to scan existing transport, just like Adam, it stays at:
Status : Scanning Signal Locked
Scan Activity: 5% hangs here forever.
Signal Strength: fluctuates between 1 and 3 % with an occasional spike to
99%
Signal/Noise: 99% solid. Never changes.
[snip]
I have a feeling that myth is getting stuck on PID 0000 fails to tune it and this is where it all ends. Gonna try to find the scan routine in source and see if it starts at 0000 and if it does change it to 0001 and see what happens.
Marc
Interesting thought. Please let us know how it turns out.
-- John <><
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
