I changed the settings to say /dev/ALSA:spdif, but I get the following error: 2005-04-01 19:02:20.311 Error opening audio device (/dev/ALSA:spdif), the errorwas: No such file or directory /dev/ALSA:spdif: No such file or directory 2005-04-01 19:02:20.330 Error opening audio device (/dev/ALSA:spdif), the errorwas: Illegal seek
-Gregg On Apr 1, 2005 3:04 PM, John Sturgeon <[EMAIL PROTECTED]> wrote: > Gregg wrote: > > >here is what I have > >card 0: Live [Sound Blaster Live!], device 0: emu10k1 [EMU10K1] > >card 0: Live [Sound Blaster Live!], device 2: emu10k1 efx [EMU10K1 EFX] > > > >-Gregg > > > >On Apr 1, 2005 11:37 AM, John Sturgeon <[EMAIL PROTECTED]> wrote: > > > > > >>Gregg wrote: > >> > >> > >> > >>>One last question. Do I have to modify my .asoundrc file. I am just > >>>using Jarods generic one. > >>> > >>>-G > >>> > >>>On Apr 1, 2005 8:19 AM, John Sturgeon <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>> > >>> > >>>>You need to type in ALSA:spdif there, and override those two. > >>>> > >>>>-- > >>>>John <>< > >>>> > >>>>Gregg wrote: > >>>> > >>>> > >>>> > >>>> > >>>> > >>>>>Thanks. I will try it when I get home I know I saw two options > >>>>>/dev/dsp (current) and /dev/adsp. > >>>>> > >>>>>-Gregg > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>>>In mythfrontend Setup->General ->Audio make sure 'audio output device' > >>>>>>says ALSA:spdif, and make sure you select "enable AC3 to spdif > >>>>>>passthrough" and de-select "Use internal volume controls" > >>>>>>-- > >>>>>>John Sturgeon <>< > >>>>>>http://www.sturgeonfamily.com/mythtv.php > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>> > >>>> > >>depends on your board. Most folks seem to have their SPDIF device > >>located at device 1 so their asoundrc files look like this: > >>pcm.!default { > >>type hw > >>card 0 > >>device 1 > >>} > >> > >>pcm.intel8x0 { > >>type hw > >>card 0 > >>} > >> > >>ctl.intel8x0 { > >>type hw > >>card 0 > >>} > >> > >>But my spdif out is at device 2, so I had to alter my pcm.!default to > >>card 0 device 2. > >> > >>What box are you using? > >> > >>-- > >>John <>< > >>~ > >> > >> > >> > >> > Not sure, but my guess is you'll have to use device 2 > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
