I changed the line in my /usr/local/bin/start-ivtv script from: /sbin/modprobe ivtv
to /sbin/modprobe ivtv tuner=39 And that fixed the problem. I feel soooooooooo stupid for not noticing that before! Thanks everyone for their quick replies. ---------- Original Message ----------- From: [EMAIL PROTECTED] To: [email protected] Sent: Sun, 3 Apr 2005 06:30:08 -0500 (CDT) Subject: [mythtv-users] (no subject) > I am building a PVR with a Hauppauge PVR-350, Mandrake 10.1, Maiku's guide > (http://www.byopvr.com/Sections+index-req-viewarticle-artid-13-page-1.html). > > Everything is installed/compiled and configured, but when I try to watch > TV or record > something, all I ever get is static (even using the cat /dev/video0 > > test.mpg). Every > channel is the > > same...just static. Watching videos (from other sources) play just fine > in both mplayer > and mythtv. > > I've checked, rechecked, and triple checked all of the settings in > mythtvsetup. Nothing > changes anything. > > Instead of adding stuff to modules.conf, I followed the guide and added > the following to > the /usr/local/bin/start-ivtv script: > > /sbin/modprobe i2c-core > /sbin/modprobe i2c-algo-bit > /sbin/modprobe tuner type=47 > /sbin/modprobe msp3400 > /sbin/modprobe videodev > /sbin/modprobe saa7115 > /sbin/modprobe ivtv > /sbin/modprobe lirc_i2c > /usr/local/sbin/lircd -d /dev/lirc0 --permission=666 > /etc/init.d/mythbackend start > > ivtv info from /var/log/messages: > > Apr 2 12:10:00 localhost kernel: ivtv: ==================== START INIT IVTV > ==================== > Apr 2 12:10:00 localhost kernel: ivtv: version 0.2.0 (rc3a) loading > Apr 2 12:10:00 localhost kernel: ivtv: Linux version: 2.6.8.1-12mdk 686 > gcc-3.4 > Apr 2 12:10:00 localhost kernel: ivtv: In case of problems please include > the debug info > Apr 2 12:10:00 localhost kernel: ivtv: between the START INIT IVTV and > END INIT IVTV > lines when > Apr 2 12:10:00 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. > Apr 2 12:10:00 localhost kernel: ivtv: Autodetected WinTV PVR 350 card > Apr 2 12:10:00 localhost kernel: ivtv: Found an iTVC15 based chip > Apr 2 12:10:00 localhost kernel: PCI: Found IRQ 9 for device 0000:00:0a.0 > Apr 2 12:10:00 localhost kernel: ivtv: Unreasonably low latency timer, > setting to 64 > (was 32) > Apr 2 12:10:00 localhost kernel: ivtv: VIA PCI device: 0x0601 vendor: 0x1106 > Apr 2 12:10:00 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus > ivtv i2c driver #0 > Apr 2 12:10:00 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] > Apr 2 12:10:00 localhost kernel: msp34xx: ivtv version > Apr 2 12:10:00 localhost kernel: msp34xx: init: chip=MSP3448W-A2, has > NICAM support, > simple (D) mode, simpler (G) no-thread mode > Apr 2 12:10:00 localhost kernel: msp34xx: $Id$ compiled on: Apr 1 2005 > 18:36:29 > Apr 2 12:10:01 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok] > Apr 2 12:10:01 localhost kernel: saa7115: starting probe for adapter ivtv > i2c driver #0 > (0x10005) > Apr 2 12:10:01 localhost kernel: saa7115: detecting saa7115 client on > address 0x42 > Apr 2 12:10:01 localhost kernel: saa7115: writing init values > Apr 2 12:10:01 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok] > Apr 2 12:10:01 localhost kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 > Apr 2 12:10:01 localhost kernel: tveeprom: Ignoring new-style parameters > in presence of > obsolete ones > Apr 2 12:10:01 localhost kernel: tveeprom: Hauppauge: model = 48132, rev > = K268, > serial# = 2918791 > Apr 2 12:10:01 localhost kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx > = 68, type = 47) > Apr 2 12:10:01 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = > 0x08, v4l2 = > 0x00001000) > Apr 2 12:10:01 localhost kernel: tveeprom: audio_processor = MSP3440 > (type = 11) > Apr 2 12:10:01 localhost kernel: ivtv: i2c attach [client=tveeprom[0],ok] > Apr 2 12:10:01 localhost kernel: ivtv: Tuner Type 47, Tuner formats > 0x00001000, Radio: > yes, Model 0x00ad2598, Revision 0x00000001 > Apr 2 12:10:01 localhost kernel: ivtv: NTSC tuner detected > Apr 2 12:10:01 localhost kernel: ivtv: Radio detected > Apr 2 12:10:01 localhost kernel: saa7127: Ignoring new-style parameters > in presence of > obsolete ones > Apr 2 12:10:01 localhost kernel: saa7127: video encoder driver version V > 0.3 loaded > Apr 2 12:10:01 localhost kernel: saa7127: Selecting NTSC video Standard > Apr 2 12:10:01 localhost kernel: saa7127: Selecting S-Video+Composite > Apr 2 12:10:01 localhost kernel: saa7127: Turn WSS off > Apr 2 12:10:01 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format > Apr 2 12:10:01 localhost kernel: saa7127: Selecting Normal Encoder Input > Apr 2 12:10:01 localhost kernel: saa7127: Enable Video Output > Apr 2 12:10:01 localhost kernel: ivtv: i2c attach [client=saa7127[0],ok] > Apr 2 12:10:02 localhost kernel: ivtv: Encoder revision: 0x02040011 > Apr 2 12:10:02 localhost net_applet[3735]: ### Program is starting ### > Apr 2 12:10:02 localhost kernel: ivtv: Decoder revision: 0x02020023 > Apr 2 12:10:02 localhost kernel: ivtv: Configuring WinTV PVR 350 card > with 9 streams > Apr 2 12:10:02 localhost kernel: ivtv: Create DMA stream 0 using 256 > 16384 byte buffers > 4194304 kbytes total > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 0 minor 0 > Apr 2 12:10:02 localhost kernel: ivtv: Create DMA stream 1 > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 1 minor 32 > Apr 2 12:10:02 localhost kernel: ivtv: Create stream 2 using 40 52224 > byte buffers > 2097152 kbytes total > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 2 minor 224 > Apr 2 12:10:02 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 > byte buffers > 2097152 kbytes total > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 3 minor 24 > Apr 2 12:10:02 localhost kernel: ivtv: Create stream 4 > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 4 minor 64 > Apr 2 12:10:02 localhost kernel: ivtv: Create DMA stream 5 using 16 65536 > byte buffers > 1048576 kbytes total > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 5 minor 16 > Apr 2 12:10:02 localhost kernel: ivtv: Create stream 6 using 1024 2048 > byte buffers > 262144 kbytes total > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 6 minor 228 > Apr 2 12:10:02 localhost kernel: ivtv: Create stream 7 > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 7 minor 232 > Apr 2 12:10:02 localhost kernel: ivtv: Create DMA stream 8 > Apr 2 12:10:02 localhost kernel: ivtv: Registered v4l2 device, streamtype > 8 minor 48 > Apr 2 12:10:02 localhost kernel: ivtv: Setting Tuner 47 > Apr 2 12:10:02 localhost kernel: tuner: tuner type not set > Apr 2 12:10:02 localhost kernel: ivtv: Setting audio matrix to input 3, > output 1 > Apr 2 12:10:02 localhost kernel: ivtv: Switching standard to NTSC. > Apr 2 12:10:02 localhost kernel: tuner: tuner type not set > Apr 2 12:10:02 localhost kernel: ivtv: ivtv_enc_thread: pid = 3792, itv = > 0xe057c4e0 > Apr 2 12:10:02 localhost kernel: ivtv: ivtv_dec_thread: pid = 3793, itv = > 0xe057c4e0 > Apr 2 12:10:03 localhost kernel: spurious 8259A interrupt: IRQ7. > Apr 2 12:10:03 localhost kernel: saa7115: decoder set norm NTSC > Apr 2 12:10:03 localhost kernel: saa7115: set audio: 0x01 > Apr 2 12:10:03 localhost kernel: saa7127: Setting Encoder Video Standard > Apr 2 12:10:03 localhost kernel: saa7127: Set NTSC Video Mode > Apr 2 12:10:03 localhost kernel: saa7127: Selecting NTSC video Standard > Apr 2 12:10:03 localhost kernel: ivtv: Initialized WinTV PVR 350, card #0 > Apr 2 12:10:03 localhost kernel: ivtv: ==================== END INIT IVTV > ==================== > > I had everything running fine (tv was visible) with a different > motherboard, but changed > from a ATX-->mini-ATX to fit this in a smaller case. Formated and > reinstalled with the > new motherboard, > > but have never had any luck getting the tv to work. > > Cable does work (checked it with a tv). > > Getting frustrated as I had this working; I'm out of ideas of what to check. > > Checked this mailing list for similiar problems, but nothing mentioned in > any of them > seem to fix my problems. I actually don't see any problems in any > logs/files, which > makes fixing this that > > much harder. > > Any help would be appriciated. > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ------- End of Original Message ------- _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
