Re: [mythtv-users] frontend only remote?

[Louis Adamich]

I used the circuit here - http://www.mythtv.info/moin.cgi/HardWare_2fRemoteControls_2fHomeMadeSerialReceiver - but where the tsop is I put in a phono jack the same size as the one on the cable that came with the remote.  It all fit into the cable hood of the serial connector.  I plug the serial connector into the serial port and the cable into the connector. Louis [EMAIL PROTECTED] wrote: Care to share how to make the receiver? Mark Quoting Louis Adamich <[EMAIL PROTECTED]>: I'm using the remote from my 250. The 250 is in a server under the stairs so I couldn't use the remote there. I used the receiver that came with it to make one of the "do it yourself serial receivers". Works fine. You can also use it with one of the Packard Bell receivers you see on Ebay all the time. Louis David wrote: [EMAIL PROTECTED] wrote: On a frontend only machine, ( no capture card ) what is the best option for a remote control? Are there any inexpensive options to add a remote control to a PC that interfaces well with lirc/mythtv? Recomendations? Experiences? If you can solder and can figure out what shops sell transistors then you can make your own serial receiver. So easy it's not funny. David _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ---------------------------------------------------------------- This message was sent using OnNow Hosting Webmail. Hosting and email starting at $4.99/mo http://www.onnow.net _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users