> Thom, > > did your remote work before adding the 250? Yes, worked good.
> make sure you have the correct lircd.conf file (in > /etc) set up for your remote and i also have a lircrc file located in > /home/mythtv/.mythtv that i had to fix. i believe Jarod has/had > sample config files linked within his setup doc. (yes, i read most of > Jarods docs even though i set up KnoppMyth. i was curious as to what > all the rage was. ;) > if you're sure your config files are set up correctly you can run irw > or irrecord from the command line to see what data your ir reciever > captures from your remote. if you get this far and are still having > problems getting the remote to work within Myth, post back with the > info from irw and someone should be able to walk you through the next > steps. > I think I may need to put some files in udev or something for FC3. When I run irw the remote shows no codes at all, plugged into either port. Anyone else have any ideas? Thanks. -- -=/>Thom _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
