On Apr 4, 2005 9:36 PM, Brian McCrary <[EMAIL PROTECTED]> wrote: > Hello, > > Like many others, I'm trying to get a HD-3000 card to work with MythTV. > I'm using MythTV v0.17 (debian package), pcHDTV 2.0 drivers, 2.6.11.4 > kernel, and Debian 3.1. When I go into mythtv-setup, I can setup the > card as a DVB and the card type comes back as "Success" but the card > name says "Could not get card info for card #0!" > > I am not sure if this is even the right procedure, but from reading > other mailings it looks like all I need to load is the cx88-dvb module > and setup everything as a DVB device instead of using the PCHDTV capture > card configuration. It looks like some people are using v4l2 drivers, > which I'm assuming uses the cx88-atsc module, but loading the module > immediately causes a kernel panic. > > When I try to scan for channels, I get the message "Failed to probe the > card" and on the console get "Couldn't open /dev/video32 to probe its > inputs". Here's the modules, log output, and device driver entries I > have. Anyone care to tell me what step I'm missing? > > Module load messages: > Linux video capture interface: v1.00 > cx2388x dvb driver version 0.0.4 loaded > cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV > [card=22,autodetected] > ACPI: PCI interrupt 0000:02:03.2[A] -> GSI 21 (level, low) -> IRQ 21 > cx88[0]/2: found at 0000:02:03.2, rev: 5, irq: 21, latency: 32, mmio: > 0xfb000000 > cx88[0]/2: cx2388x based dvb card > DVB: registering new adapter (cx88[0]). > DVB: registering frontend 0 (pcHDTV HD3000 HDTV)... > > Modules loaded (I also have a bt878 card): > cx88_dvb 6660 0 > cx8802 8708 1 cx88_dvb > mt352 7300 1 cx88_dvb > cx88xx 48928 2 cx88_dvb,cx8802 > i2c_algo_bit 9992 2 bttv,cx88xx > ir_common 6404 1 cx88xx > btcx_risc 4872 3 bttv,cx8802,cx88xx > tveeprom 12440 2 bttv,cx88xx > or51132 10884 1 cx88_dvb > video_buf_dvb 5508 1 cx88_dvb > dvb_core 79400 1 video_buf_dvb > video_buf 18308 5 > bttv,cx88_dvb,cx8802,cx88xx,video_buf_dvb > cx22702 9476 1 cx88_dvb > > Device entries: > crw-rw---- 1 root video 81, 32 Apr 2 15:37 /dev/video32 > crw-rw---- 1 root video 212, 1 Apr 4 00:44 /dev/dvb/adapter0/audio0 > crw-rw---- 1 root video 212, 6 Apr 4 00:44 /dev/dvb/adapter0/ca0 > crw-rw---- 1 root video 212, 4 Apr 4 00:44 /dev/dvb/adapter0/demux0 > crw-rw---- 1 root video 212, 5 Apr 4 00:44 /dev/dvb/adapter0/dvr0 > crw-rw---- 1 root video 212, 3 Apr 4 00:44 /dev/dvb/adapter0/frontend0 > crw-rw---- 1 root video 212, 7 Apr 4 00:44 /dev/dvb/adapter0/net0 > crw-rw---- 1 root video 212, 8 Apr 4 00:44 /dev/dvb/adapter0/osd0 > crw-rw---- 1 root video 212, 0 Apr 4 00:44 /dev/dvb/adapter0/video0 > > Brian > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
I believe this also can happen of the mackend is running with trying to run mythtvsetup... _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
