On Apr 5, 2005 3:54 PM, Matt <[EMAIL PROTECTED]> wrote: > On Apr 5, 2005 2:54 PM, Jarod Wilson <[EMAIL PROTECTED]> wrote: > > On Tuesday 05 April 2005 12:47, Matt wrote: > > > http://www.gossamer-threads.com/lists/ivtv/devel/19047?page=last - > > > > > >From that page, it appears that the firmware is the same name for the > > > > > > 250 as it is for the 500. So how do I install the firmware for both > > > the 250 and the 500 into /lib/modules? > > > > They can use the same firmware for the encoding portion (though some report > > better success with newer encoder firmware versions, I'm using the same one > > for both the 250 and 500 without a problem). The ivtvfwextract.pl part > > should > > have extracted and installed ivtv-fw-enc.bin and ivtv-fw-dec.bin > > into /lib/modules (which it appears is the case, based on your log output). > > The HcwMakoA.rom file is specific to the 150 and 500. So if you have those > > three files, you should be fine (or at least fine enough to get a/v off > > everything). > > > > -- > > Jarod Wilson > > Still no dice. Same problem. I've used new drivers for the firmware, > I made sure to put the HcwMakoA.rom in the correct folder. I've set > the resolution to encode at the proper rates. What happens is I get > static snow that fades into black every second, and it just repeats > doing that. However, the pvr-250s still work. I've also tried > turning off the machine for +2 minutes and no change. Any ideas? >
I did this, but not sure what to tell of it. ivtvctl -I -d /dev/video3 (This is one of the tuners on the PVR-500) check SAA7115 input signal ioctl: VIDEO_STATUS = Bad SAA7115 reg[STATUS#1 - 0x1E] = 08 Color Standard (D0-D1): BW/No color White peak loop (D2): Not activated Gain value for act.lum. (min) (D3): Limited Gain value for act.lum. (max) (D4): Not limited WIPA-mode slow-time constant (D5): Not activated Horizontal frequency (D6): Locked Field length (D7): Non-standard SAA7115 reg[STATUS#2 - 0x1F] = 00 Ready for capture (D0): No Macrovision 7.01 (D1): No MV Colorstripe burst (D2): No MV Colorstripe burst type 3 (D3): No Input signal timebase (D4): Non-stable (VCR) Field frequency (D5): 50Hz H & V loops (D6): Locked Interlace (D7): Not detected ivtvctl -I -d /dev/video0 (This is the PVR-250) check SAA7115 input signal ioctl: VIDEO_STATUS = Sat/Dvd SAA7115 reg[STATUS#1 - 0x1E] = 81 Color Standard (D0-D1): NTSC White peak loop (D2): Not activated Gain value for act.lum. (min) (D3): Not limited Gain value for act.lum. (max) (D4): Not limited WIPA-mode slow-time constant (D5): Not activated Horizontal frequency (D6): Locked Field length (D7): Standard SAA7115 reg[STATUS#2 - 0x1F] = b1 Ready for capture (D0): Yes Macrovision 7.01 (D1): No MV Colorstripe burst (D2): No MV Colorstripe burst type 3 (D3): No Input signal timebase (D4): Stable (broadcast/DVD) Field frequency (D5): 60Hz H & V loops (D6): Locked Interlace (D7): Detected _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
