sounds like your cable company may have changed things... throw a patch on 6200ch at the begining that makes sure the channel is three digits and adds neccesary zeros
On 4/13/05, Michael Eldridge <[EMAIL PROTECTED]> wrote: > I'm having some odd channel changing behavior and I'm not sure if it > was caused by a recent mythtv CVS build I did or maybe a lib upgrade. > Channel changing used to work fine. I did a CVS build of mythtv and the > 1.0 of libiec61884 on the 12th. > > It used to be when it came time for a program to be recorded 6200ch > would be called with the channel number, the channel would change, and > all was well. Now when it's time to record a program the numbers on the > 6200's display change briefly to the numbers of the channel being > changed to, so it appears that the channel will be changed, but it > doesn't actually change the channel. Running 6200ch manually does > change the channel no problem. mythtv-setup has /usr/local/bin/6200ch > for the remote channel changing command so that's all good. > > I noticed that when manually inputting numbers on the remote to change > the channel you have to put in three numbers for it to change without > having to press the enter button. For example, if you wanted to change > to channel 3 without pressing 3 -> enter you would have to press 0 -> 0 > -> 3. It doesn't seem like that would be a problem since I can run > '6200ch 3' and the channel changes. Strange. > > Any ideas? > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > -- Thanks, Devan Lippman <[EMAIL PROTECTED]> _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
